bora Pro PKG3 Operating And Installation Instructions Download Page 40

EN

40

Warranty, technical service, spare parts, accessories

www.bora.com

X

X

Observe all safety and warning information (see the Safety chapter).

11.1  BORA manufacturer’s warranty

BORA provides its end customers with a 2-year manufacturer’s 

warranty for its products. The end customer is entitled to this 

warranty in addition to the statutory claims for defects against 

the sellers of our products.

The manufacturer’s warranty applies to all BORA products sold 

by authorised BORA dealers or BORA-trained salespeople within 

the European Union, with the exception of products labelled by 

BORA as Universal products or accessories.

The manufacturer’s warranty starts as soon as the BORA 

product is handed over to the end customer by an authorised 

BORA dealer and is valid for 2 years. By registering on www.

bora.com/registration the end customer has the possibility of 

extending the manufacturer’s warranty.

The manufacturer’s warranty requires expert (in accordance with 

the valid BORA ventilation handbook and operating instructions 

at the time of installation) installation of the BORA products by 

an authorised BORA dealer. During use, the end customer is to 

adhere to the specifications and instructions in the operating 

manual.

In order to file a warranty claim, the end customer is to notify 

their dealer or BORA of the fault and must present the receipt. 

Alternatively, the end customer can provide proof of purchase by 

registering on www.bora.com.

BORA guarantees that all BORA products are free from material 

and product defects. The defect must exist prior to delivery of 

the product to the end customer. In the event that a warranty 

claim is filed, the warranty shall not commence anew.

BORA will correct defects in BORA products at its own discretion 

by repairing or replacing the product. All costs for the correction 

of defects under the manufacturer’s warranty shall be assumed 

by BORA.

Expressly not covered by the BORA manufacturer’s warranty are:

X

O

BORA products that were not sold by authorised BORA dealers 

or from BORA-trained salespeople.

X

O

Damage caused by non-adherence to the operating 

instructions (including product care and cleaning) This 

represents improper use.

X

O

Damage caused by normal use, e.g. traces of usage on the 

cooktop

X

O

Damage caused by external influences (such as transport 

damage, ingress of condensation, damage caused by the 

elements such as a lightning strike)

X

O

Damage caused by repairs or attempts to repair not made by 

BORA or persons authorised by BORA

X

O

Damage to the glass ceramic

X

O

Voltage fluctuations

X

O

Secondary damage or claims for damages beyond the defect 

X

O

Damage to plastic parts

Legal claims, such as particularly statutory claims for defects or 

product liability are not limited by the warranty.

If a defect is not covered by the manufacturer’s warranty, the 

end customer can employ the services of the BORA technical 

service, however, they must cover the costs themselves.

11  Warranty, technical service, spare parts, accessories

The laws of the Federal Republic of Germany apply to these 

warranty conditions.

You can contact us by:

X

O

Telephone: +49 800 7890 0987 Monday to Thursday from 

08:00-18:00 and Friday from 08:00-17:00

X

O

Email: [email protected]

11.2  Service

BORA Service:

see reverse side of operating and assembly instructions

+800 7890 0987 

X

X

In the case of faults you cannot fix yourself, contact your 

BORA specialist supplier or the BORA Service Team.

The BORA Service Team will require the type designation and 

serial number of your device (FD number). 

Both pieces of information can be found on the nameplate on 

the back of the instructions and on the appliance base.

11.3  Spare parts

X

X

Only use original spare parts for repairs.

X

X

Repairs may only be carried out by the BORA Service Team.

 

i

Spare parts can be obtained from your BORA dealer, the 

BORA online service website at www.bora.com/service 

or by calling the service number provided.

11.4  Accessories

X

O

BORA Pro knob ring PKR3

X

O

BORA Pro knob ring All Black PKR3AB

Special accessory for glass ceramic cooktops:

X

O

BORA Glass ceramic scraper UGS

Special accessory for PKG3:

X

O

BORA gas nozzle set natural gas G25/25 mbar PKGDS2525

X

O

BORA gas nozzle set natural gas G20/13 mbar PKGDS2013

X

O

BORA gas nozzle set natural gas G20/20 mbar PKGDS2020

X

O

BORA gas nozzle set natural gas G25/20 mbar PKGDS2520

X

O

BORA gas nozzle set natural gas G20/25 mbar PKGDS2025

X

O

BORA gas nozzle set natural gas G20/10 mbar PKGDS2010

X

O

BORA gas nozzle set liquid gas G30/G31 50 mbar 

PKGDS3050

X

O

BORA Pro gas nozzle set liquid gas G31/G30 mbar 

PKGDS3130

X

O

BORA gas nozzle set liquid gas G30/G31 28-30 mbar 

PKGDS3028

X

O

BORA Pro gas nozzle set liquid gas G31/50 mbar PKGDS3150

X

O

BORA burner set PKGBS

X

O

BORA pan support small PKGTK

X

O

BORA pan support big PKGTG

X

O

BORA glass ceramic scraper UGS

Summary of Contents for Pro PKG3













































Reviews: