EN
31
Functions and operation
www.bora.com
X
X
Ensure that the burner parts and pan supports are positioned
correctly.
X
X
Do not switch the gas cooktop on until all burner parts are
correctly assembled.
X
X
Ensure that the burner flame does not protrude from under
the base of the cookware and rise up the outside of the pot.
X
X
Do not keep any highly flammable objects near the cooktop.
For maximum performance with minimum gas
consumption, we recommend that you:
X
X
use cookware with a base that covers the flame entirely so
that this does not burn beyond the base;
X
X
use suitable pans on each gas burner;
X
X
position the cookware centrally on the gas hob;
X
X
set the gas burner to the lowest power level (small flame)
once the pan contents are simmering;
X
X
adjust the power level of the cooktop extractor to the power
level of the gas cooktop.
Using the gas cooktop together with the cooktop
extractor
If the gas cooktop is used together with a cooktop extractor, the
airflow of the extractor can affect the gas flame.
X
X
Avoid using a high power level on the cooktop extractor when
the gas cooktop is set to a low power level.
X
X
If necessary, reduce the power level on the cooktop extractor
when you turn on the gas cooktop.
X
X
Do not use the gas cooktop without cookware. The gas flame
is protected from the airflow of the cooktop extractor by the
geometry of the pan supports and the cookware.
i
Flames can set fire to or damage the grease filter in the
cooktop extractor and the air-channelling components.
Never flambé food when using a cooktop extractor.
7.3.3 Setting cooking zone power levels
The power levels are controlled by turning the knob ring to the
desired power level (electronic power adjustment).
Fig. 7.7
Setting cooking zone power levels
X
O
The selected power level is shown in the power display on the
control knob that has been touched.
Increasing the power level
X
X
Turn the knob ring clockwise
Reducing the power level
X
X
Turn the knob ring anticlockwise
7.3.4 Cooktop power setting
When the power setting is activated, maximum cooking zone
power is available for a predefined time.
i
Never heat up oil, fat and the like on this power setting.
The bottom of the pan can overheat due to the high
power output.
Activating the power setting for a cooking zone
X
X
Turn the knob ring clockwise to power setting
P
.
i
After 10 minutes, the power setting is automatically
switched back to power level 9.
Deactivating the power setting early
X
O
Setting another power level for the cooking zone with the
power setting active
7.4 Function menu
i
Every appliance offers different additional functions.
These can be selected and activated via a function menu.
Only the functions available for each type of appliance
are shown in the corresponding function menu.
Function menu on gas cooktop PKG3
A total of 3 additional functions are available on gas cooktops:
Menu item
Description
1
v
Heat retention function (3 levels)
2
t
Timer function (automatic cut-off)
3
A
Automatic heat up function
Tab. 7.2
Function menu on gas cooktop PKG3
Calling up the function menu
Fig. 7.8
Accessing a cooktop function menu
X
X
Touch the cooktop control knob
X
O
The function menu is opened.
X
O
The first menu item is shown in the control knob display.
7.4.1 Variable heat retention function
The 3 heat retention levels enable cooked foods to be kept warm
at a constant temperature.
X
O
The maximum duration of the heat retention function is limited
to 8 hours.
Summary of Contents for Pro PKG3
Page 41: ...EN 41 Notes www bora com 12 Notes...
Page 42: ...EN 42 Notes www bora com...
Page 43: ...EN 43 Notes www bora com...
