bora PKCH2, Operating And Instalation Instructions

Page: 23 / 36

EN
23
Installation
www.bora.com
5.6 Configuration menu
Once installation is complete, you can adjust the basic
settings for the cooktop. These can then be changed at
any time.
5.6.1 Accessing the configuration menu
X X
Turn the control knob to the 11 o’clock position.
The control knob display shows
t
.
X X
Press the touch surface of the control knob for one
second. The display changes to
0 0 0
.
X X
Press the touch surface again within 3 seconds and
hold for 5 seconds.
Q Q
The control knob display shows
C
, a beep is heard and
the configuration menu is available.
5.6.2 Select menu option
X X
Turn the knob ring to select the menu option you want.
The following menu options are available:
Menu options
C 0
Warning beep volume
C 1
Select operating mode (normal operation or demo mode)
C 2
0° or 180° installation
C 9
Availability of the pause function
Tab. 5.5 Menu options in the configuration menu
X X
Touch the touch surface on the control knob again for
1 second to confirm the menu you want.
Q Q
The sub-menu is accessed and the display switches to
a three-character combination (e.g.
C 2 3
).
INFO In the three-character combination shown, the
right-hand figure shows the value saved in the
system.
Setting the volume of the warning beep
Once you have confirmed menu option
C 0
, you can set
the volume of the warning beep.
Setting Warning beep volume
C 0 0
100% (max. volume) Factory setting
C 0 1
10% (min. volume)
C 0 2
20%
C 0 3
30%
C 0 4
40%
C 0 5
50%
C 0 6
60%
C 0 7
70%
C 0 8
80%
C 0 9
90%
Tab. 5.6 Warning beep volume
Select operating mode
Once you have confirmed menu option
C 1
, you can select
the operating mode.
Setting Operating mode
C 1 0
Normal operation Factory setting
C 1 1
Demo mode
Tab. 5.7 Operating modes
INFO All the control knob functions are available in
demo mode. The heating function for the cooktop
is deactivated. Demo mode is used, for example,
for exhibitions.
0° or 180° installation
In menu option
C 2
, you can set whether the cooktop is
installed rotated by 180°.
Setting Display
C 2 0
0° installation Factory setting
C 2 1
180° installation
Tab. 5.8 Installation direction
INFO For installation rotated by 180°, the setting
C 2 1
correctly assigns the correct cooking zones inside
the control knob display.
Availability of the pause function
Once you have confirmed menu option
C 9
, you can
permanently deactivate the pause function.
Setting Pause function available/deactivated
C 9 0
Pause function activated Factory setting
C 9 1
Pause function deactivated
C 9 2
Pause function with power level display activated
Tab. 5.9 Availability of the pause function
5.6.3 Changing the set value
X X
Turn the knob ring clockwise to increase the value.
X X
Turn the knob ring anti-clockwise to reduce the value.
X X
Press the touch surface on the control knob for 1
second to confirm the new value. The value is saved
and a beep is heard. The previously selected menu
option is shown in the control knob display.