bora PKCH2, Operating And Instalation Instructions

Page: 17 / 36

EN
17
Installation
www.bora.com
Cut-out dimensions when installing cooktops or cooktops
and the cooktop extractor next to each other:
Cooktops/cooktop extractor A in mm B in mm
1/0 374 346
1/1 485 457
2/1 856 828
3/2 1338 1310
4/2 1709 1681
Tab. 5.2 Cut-out dimensions for flush installation of appliance
combinations
5.4.2 Surface mounting
x
B ±2
≤ R5
≥ 74
(≥ 74)
516 ±2
≥ 700
Fig. 5.5 Cut-out dimensions for surface mounting
12
10 - 40
Fig. 5.6 Surface mounting cut-out
5.4 Cut-out dimensions
INFO All dimensions are shown from the front edge of
the front cover.
Worktop overhang
≥60 14 x
(≥74)
Fig. 5.2 Worktop overhang
X X
Please note the worktop overhang x when creating the
worktop cut-out. Applicable to flush installation and
surface mounting.
5.4.1 Flush installation
x
A ±2
B ±2
544 ±2
≤ R5
≤ R5
≥ 74
(≥ 74)
516 ±2
≥ 700
Fig. 5.3 Cut-out dimensions for flush installation
7 +0,5
14
10 - 40
Fig. 5.4 Groove dimensions for flush installation