EN
24
Installation
www.bora.com
Connecting an additional fan
X
X
Connect the fan control line [8] to the control unit [4].
X
X
Connect the fan power supply cable [9] to the control unit [6].
X
X
Check all the plug connections to ensure that they are secure.
4.11.4 Establishing contact between the
cooktop extractor and cooktops
2
ZONE1 INTERF. COM1 ZONE2
1
ZONE1 INTERF. COM1 ZONE2
3
Fig. 4.55
Establishing contact between the cooktop extractor
and cooktops
[1]
Cooktop extractor communication cable ports (x 2)
[2]
Cooktop communication cable port
[3]
Ribbon cable
X
X
Using the communication ports provided, connect the
cooktop extractor [1] to the cooktop or cooktops [2].
X
X
Only use the cables supplied in the scope of delivery.
i
The full range of functions on the appliances will only
be available if the cooktop extractor and cooktops are
connected correctly.
4.11.5 Connecting the power supply
X
X
Observe all national and regional laws and regulations as well as
the supplementary regulations of the local utility companies.
i
The appliances may only be connected to the mains power
supply by certified specialists. The specialist also assumes
responsibility for the proper installation and commissioning.
Connection diagrams
1
1
1
1
1
3
3
6
5
4
4
7
8
9
2
2
11
10
14
16
15
13
12
Fig. 4.56
PKA3/PKA3AB connection diagram
[1]
Interface/control knob cable
[2]
Cooktop communication cable
[3]
Cooktop power supply cable
[4]
Power supply for each cooktop
[5]
CAT 5e communication cable
[6]
Control unit power supply
[7]
Control unit power supply cable (country-specific)
[8]
Fan 1 power supply cable
[9]
Fan 1 control line
[10]
Fan 2 power supply cable
[11]
Fan 2 control line
[12]
Home Out port
[13]
Home In port
[14]
Home In connection cable
[15]
External device
[16]
Power supply for external device
[M]
Fan 2
[S1]
External switch contact