EN
23
Installation
www.bora.com
4.11.2 Ports on cooktop extractor system
PKAS3/PKAS3AB
2
3
4
5
1
Fig. 4.51
Rear ports on PKAS3 and PKAS3AB
[1]
Home In
[2]
Home Out
[3]
Additional fan control line
[4]
Additional fan power supply cable
[5]
Power supply cable with microfuse
Connecting an additional fan
X
X
Connect the additional fan control line to the port [3] provided
on the back of the appliance.
X
X
Connect the additional fan power supply cable to the port [4]
provided on the back of the appliance.
X
X
Check all the plug connections to ensure that they are secure.
4.11.3 Connecting cooktop extractor PKA3/
PKA3AB
Connecting the control unit and fan to the cooktop
extractor
1
Fig. 4.52
Side port for the control unit on cooktop extractor
PKA3/PKA3AB
[1]
Control unit port
2
3 4
5
6
7
Fig. 4.53
Control unit ports
[2]
CAT 5e communication cable
[3]
Fan 1 control line
[4]
Fan 2 control line
[5]
Fan 1 power supply cable
[6]
Fan 2 power supply cable
[7]
Power supply cable with microfuse
8
9
Fig. 4.54
Plinth fan connection plugs
[8]
Plinth fan control line connection plug
[9]
Plinth fan power supply cable connection plug
X
X
Using the CAT 5e communication cable (included in the
scope of delivery) connect the port on the side of the cooktop
extractor [1] to the port on the control unit [2].
X
X
Connect the plinth fan control line [8] to the control unit [3].
X
X
Connect the plinth fan power supply cable [9] to the control
unit [5].
Removing the power supply cable
To remove the power supply cable [1] from the control unit [6] you
need a small slotted screwdriver.
X
X
Disconnect the control unit power supply cable from the
power supply [8].
X
X
Make sure that there is no power to the appliance.
X
X
Use the slotted screwdriver to undo the lock on the fan power
supply cable plug.
X
X
To do this, insert the slotted screwdriver into the gap in the
socket.
X
X
Press the lock down gently.
X
X
Use the slotted screwdriver to gently lever the power supply
cable plug out of the control unit socket.
X
X
Now disconnect the power supply cable from the socket.
X
X
Check the plug and the socket for damage.
X
X
Do not use damaged components.
X
X
Contact your specialist BORA retailer to replace any damaged
components.