EN
19
Operation
www.bora.com
Changing the timer settings
X
X
Press to switch on the cooktop.
Q
Q
The timer control light blinks.
X
X
Press or to set the required time.
Setting the automatic cut-off
You can set an automatic cut-off for every cooking zone.
INFO
The control light on the active cooking zones
shows that the automatic cut-off is activated.
The remaining time is displayed.
After the end of the time set, the cooking zone turns off
automatically.
Prerequisite
Q
Q
A cooking zone has been selected.
Q
Q
A power level was set.
X
X
Press the timer button .
Q
Q
The relevant cooking zone blinks and
00
appears in
the cooking zone display.
X
X
Press or to set the required time.
X
X
Press the timer button again to activate it.
Q
Q
Activation will take place within 10 seconds of the last
activation of the button.
Changing the timer settings
X
X
Press the timer button for the cooking zone for
which you want to change the time.
Q
Q
The relevant control light blinks.
X
X
Press or to set the required time.
Switching the timer off early
X
X
Press the time button for the cooking zone for
which you want to switch off the timer.
Q
Q
The relevant control light blinks.
X
X
Press until the timer display shows
00
,
or
X
X
press and at the same time. The time in the
timer display is immediately set to
00
.
6.1.11 Activating/deactivating the
childproofing feature
INFO
If a cooking zone shows
L
then
H
alternately,
the cooking zone is still hot.
X
X
activate the heat retention level
V
.
X
X
switch off the cooktop with the button.
6.1.9 Heat retention level
Q
Q
A cooking zone is in operation.
Q
Q
The power level
1
is activated.
X
X
Press to set the heat retention level
V
.
Q
Q
After 2 seconds, the cooking zone will automatically
switch off.
6.1.10 Using the timer function
You can use 2 timer functions:
Q
Q
Short-time timer (egg timer), no automatic switching
off of a cooking zone.
Q
Q
Automatic cut-off for automatically switching off a
cooking zone.
You can set a time range of between 1 and 99 minutes for
both timer functions.
X
X
If you press first, 1 minute will be pre-set as the
starting time.
X
X
If you press first, 30 minutes will be pre-set as the
starting time.
Switching off the timer signal tone
X
X
Press any sensor button on the operating panel to end
the signal tone prematurely.
Setting the short-time timer (egg timer)
You can set a short-time timer for each cooking zone.
INFO
The control light on the active cooking zones
shows that the short-time timer is activated.
The remaining time is displayed.
After the end of the time set, 00 will be displayed for a few
seconds on the timer display. A signal tone will sound for
a few seconds.
Prerequisite
Q
Q
The cooktop must be switched on.
X
X
Press the timer button or .
Q
Q
Each control light will blink and
00
will appear in the
cooking zone display.
X
X
Press or to set the required time.
Q
Q
Activation will take place within 10 seconds of the last
activation of the button.
Q
Q
If the cooktop is switched off with the on/off button
, the cooking zone control light will become active
and the remaining time will be displayed.
Summary of Contents for CCH1
Page 25: ...EN 25 Notes www bora com EN 11 Notes...
Page 26: ...EN 26 Notes www bora com...
Page 27: ......
