Page 1: ...End Panels ldentical Glide Pin Holes Top Hole For high base position Bottom Hole For low base position 70mm for fixed side only Connecting bolts for base only 4 x 40mm Cot Hardware and parts list Base Actual size Actual size Actual size I E L A J Boori International PLEASE READ CAREFULLY AUSTRALIA Wells house Unit 5 Woolley Barns Woolley Wantage OX12 8TA UK Ph 44 14 8863 9500 Fax 44 14 8863 9505 B...
Page 2: ...his cot has been manufactured for use with a mattress which measures 750mm wide by 1310mm long and a maximum thickness of 120mm The thickness of the mattress has been specified to ensure that the depth of the cot is greater than 500mm with the mattress base in the lower position and 200mm with the mattress in the highest position to minimise the risk of a child climbing or falling out of the cot W...
Page 3: ...ane 4 capping nuts provided To disassemble the cot just follow assembly instructions in reverse order To lower the dropside panel pull the dropside panel up to the top position Hold it in that position while using your leg to push at the centre of bottom bar inward Then allow the dropside panel to slide down To raise the dropside panel pull the dropside panel up from centre of the top bar until it...
