10
6
0-255
Strobe from slow to fast
7
0-15
Off light
16-36
Red on
37-56
Red + Green
57-76
Green
77-96
Green + Blue
97-116
Blue
117-136
Red + Blue
137-156
Red + Green + Blue
157-255
Color change from slow to fast
DMX table 4 channels:
CH
Value
Function contents
1
0-15
OFF
16-255
ON
2
0-255
Red dimming
3
0-255
Green dimming
4
0-255
Blue dimming
Switch the device on via the power switch. The display flashes and indicates
“HEAT”. At the same time, the machine starts the warm-up process.
While the unit is warming up, fog output will not be possible yet. Program
the necessary menu settings with the control panel. Once the warming-up
process is completed, fog output will be possible. The display stops flashing.
After operation, switch off the machine with the power switch.
Attention:
During operation smoke emission may stop. In this case the device is heating up
again, and will be ready to operate in approx.1 minutes. This process guarantees an
appropriate vaporization temperature and the best smoke emission possible. The
temperature is regulated by a high-quality thermostat.
The output nozzle will heat up during operation. Therefore don’t not touch nozzle unit
