21 |
P a g e
B o o k e r L A B ® © 2 0 1 7 - 2 0 1 9
Vintage Motor Controller (VMC) for Leslie Speakers (v19-0214)
[email protected] - +1 (864) 843-4459
Technical Notes
Speed Control Switch
1 TRS ¼” jack (J2) input for the speed control switch, compatible with Hammond-Suzuki CU-1
half-moon switch, or equivalent.
Note:
Any plug in this jack will override the amplifier speed control.
Speed In – Connector Pin Out
Tip = Chorale
Ring = Tremolo
Sleeve (Shield)
On = Connect Tip or Ring to Sleeve
Stop Switch / Memphis Mode
1 TRS ¼” jack (J1) input for selecting Memphis and Stop Modes. Compatible with footswitch,
half-moon custom switch, panel-mounted toggle switch, or equivalent.
Stop / Memphis – Connector Pin Out
Tip = Memphis Mode (Stop lower motors)
Ring = Total Stop (All motors)
Sleeve (Shield)
On = Connect Tip or Ring to Sleeve