15 |
P a g e
B o o k e r L A B ® © 2 0 1 7 - 2 0 1 9
Vintage Motor Controller (VMC) for Leslie Speakers (v19-0214)
[email protected] - +1 (864) 843-4459
Installation
Before You Get Started
-
Installing the VMC will take approximately 15 minutes.
-
No permanent changes are required to your Leslie cabinet, unless you wish to
permanently mount the VMC inside or onto the back of the Leslie. We supply machine
bolts and wood screws for a variety of mounting options.
-
The recommended mounting location is on the upper left corner of the middle panel on
the Leslie cabinet and the instructions on the following pages assume this location. The
mounting holes on the VMC align perfectly with the stock mounting holes on the
cabinet. You will use the included 10-24 machine bolts to secure the VMC enclosure to
the back of the Leslie cabinet (the washers on the stock bolts won’t work with VMC).
-
The following instructions assume you are facing the rear of the Leslie cabinet.