Bontrager Trip 300, Manual

Page: 2 / 16

このマニュアルについて
これは
Trip 300
コンピュータに関するマニュアルです。
最新情報は
bontrager.com
をご覧ください。
매뉴얼 소개
본 문서는
Trip 300
속도계에 대한 매뉴얼입니다
.
최신 내용은
bontrager.com
에서 확인하십시오
.
关于本手册
这是您的 Trip 300 码表的手册。
请在 bontrager.com 上检查更新。
About this Manual
This is the manual for your Trip 300 computer.
Check for updates at bontrager.com.
NOTES:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY
APPROVED BY THE GUARANTEE OF THIS DEVICE COULD VOID THE USER’S
AUTHORITY TO OPERATE THE DEVICE.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or experienced radio / TV technician for help.
IC: 7666A-TRIP300
FCC ID: O4GTRIP300
MADE IN CHINA
This device complies with part 15 of the FCC Rules.
Operation is subject to the following conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.