bonitron M3528M4, Customer Reference Manual

Page: 18 / 24

M3528M4
18
4.2.4.
R
IBBON
C
ONNECTOR
The unit has a ribbon connector that can be used with the Bonitron M3528D4 display
panel. The indicators on the front panel that will show basic status information for the
supply.
4.2.4.1.
B
ATTERY
S
TATUS
The Battery Status LEDs are 10 LEDs indicate which battery reaches an
Overvoltage or Undervoltage limit.
4.2.4.2.
S
TATUS
I
NDICATOR
The Status Indicator illuminates when there is a fault active in the unit. The
blink sequence will indicate the specific fault.
Table 4-1: Blink Patterns
B
LINK
P
ATTERN STATUS
On No Fault
On
– Off
Blown fuse
On
– On – Off
Over Temperature
On
– On – On – Off
Over Temperature
On
– On – On – On - Off
Undervoltage