Installation manual Bondtech DDG Ultimaker V2.0
Ultimaker 3
PC
Start the printer.
We recommend to download and install the latest firmware as it fixes problems and
adds extra functionality. Please read the Ultimaker guide
(
https://ultimaker.com/en/resources/20500-upgrade-firmware
) on how to update the
firmware if you are not sure how to install the latest firmware.
Once firmware is installed enable the developer mode.
● System
->
Maintenance
->
Diagnostics
->
Developer mode
Your Ultimaker 3 will reboot.
Download a SSH/Telnet client like Putty (
) and install it on your
computer.
Locate the IP number of your Ultimaker 3. The IP address is shown on the main
screen of the printer on the first line as well as in System -> Network on the last line.
For this example we use the following IP address: 192.168.1.133
Please read the whole guide from this point at least once before changing the values
on your own machine.
Open Putty and enter the IP-address in the Host Name field and click on Open.
