ASSEMBLY INSTRUCTIONS
Load tank housing onto post, slide tank housing down.
Remove the 4 pcs preassembled bolts
M6x10
(DD)
from the burner assembly (C).
Insert the regulator (J) from the top end of the upper post (E),
then attach the burner assembly (C) to upper post (E) using
the four bolts removed at the beginning of this step.
Tighten bolts securely.
Step 4
Step 5
Hardware Used
x 4
J
Bond Manufacturing Co., Inc. | Page 8
HH
F
E
HH
x 2
Post bolt
Step 6
Remove the 2 preassembled bolts (HH) from the lower post (F).
Insert the regulator (J) from the top end of the lower post (F).
Insert upper post (E) to lower post (F), then tighten two posts
using the 2 bolts (HH) removed at the beginning of this step.
Hardware Used
J
B
olt
M6x10