15
To keep the machine in a safe and functioning condition, perform maintenance on the machine regularly.
Always disconnect the power cable to the machine before it is cleaned, tools are changed, maintenance is
performed or when worn parts are replaced.
Daily maintenance
•
Remove accessories when not in use
•
Use compressed air and a vacuum cleaner to remove dust after each use
•
Wipe the machine and cord off with a clean cloth
•
Check start and stop function
•
Check cord and plug
Every 250 work hours or at least once a year
•
Wheels
•
Cable stand
•
Dust skirt
•
Sanding discs
The Bona FlexiSand DCS
®
Buffer is a high quality machine and is tested by authorized test staff at the factory before delivery. However,
electrical and mechanical parts wear down and age during long-term use.
Only Bona's original parts may be used because the machine is considered unique, otherwise safety functions can become impaired.
When you contact Bona or staff approved by Bona in the event of a fault or to order spare parts, always specify the type and serial
number of your machine. This information is located on the data plate of the machine.
The machine may never be cleaned using a high-pressure washer or hose.
Maintenance
Service
Maintenance, Service & Repairs
