BOMBARDIER SEA-DOO GS 5626 1998, Shop Manual

Page: 6 / 426

IV
WHAT’S NEW 0
SERVICE TOOLS AND PRODUCTS 01
• Complete new section.
MAGNETO SYSTEM 04-04
• New procedure to lock crankshaft on the 947 engine.
REMOVAL AND INSTALLATION 04-03
• New service tool for engine alignment procedure.
TOP END 04-05
• New service tool to extract the piston pin for all engines.
• New piston/cylinder wall and ring end gap clearances.
• New service tool to install dogleg circlip on the 947 engine.
• New RAVE valve adjustment on the 787 engine.
BOTTOM END 04-06
• New service tools for PTO flywheel removal and installation on the 947 engine.
CARBURETOR 06-04
• Carburetors on the 947 engine are rotated 180°. There is a new calibration and the diaphragms are
opened all the time to the atmosphere. There is no more need for a throttle position switch, amplifier
and solenoid.
• Use of Loctite 242 (blue) to carburetor mounting screws is replaced by Loctite 577 on all models.
OIL INJECTION PUMP 07-03
• New oil injection pump cable for the 947 engine.
IGNITION SYSTEM 08-03
• New testing procedures using a multimeter.
CHARGING SYSTEM 08-04
• New testing procedures using a multimeter.
WHAT’S NEW