manualshive.com logo in svg

BOMBARDIER Challenger 601-3A CL-600-2B16, Pilot Training Manual, Page: 125 / 539

Share
Download
BOMBARDIER Challenger 601-3A CL-600-2B16 Pilot Training Manual Download Page 125

FlightSafety Canada 

L t é e
L t d .

CL-600-2B16 PILOT TRAINING MANUAL

4-16

CL 601-3A/R

FOR TRAINING PURPOSES ONLY

1.

If an illuminated system malfunction light
suddenly extinguishes, it indicates:

A. Five minutes have passed.
B. The malfunction no longer exists.
C. Three minutes have passed.
D. The MASTER CAUTION lights have

been reset.

2.

The MASTER CAUTION lights can be
reset:

A. Anytime, by depressing either MAS-

TER CAUTION switchlight

B. Anytime, except when a red annun-

ciator is flashing

C. Anytime, except when a fire extin-

guisher switch is pushed

D. Anytime, except when a red annun-

ciator is illuminated steady

3.

Which of the following systems are rep-
resented on the 8 and 10 channel annun-
ciators:

A. Electronic circuit breaker
B. Weight on wheels
C. Emergency lights
D. All the above

4.

The color light that indicates a situation
requiring attention, but not immediate
action is:

A. Red (warning)
B. Amber (caution)
C. White (advisory)
D. Green (test)

5.

Which of the following aural warnings is
mutable:

A. Wailer (flap overspeed)
B. Warbler (stall)
C. C/chord (altitude alert)
D. Clacker (overspeed)

6.

Most cockpit lights are dimmed:

A. Automatically by photoelectric cells
B. By depressing any test switch
C. By depressing each individual light
D. By selecting the BRT-DIM switch to

DIM

QUESTIONS

Summary of Contents for Challenger 601-3A CL-600-2B16




























































































































































































































































































































































































































































































































































Reviews:

No comments