BOMANN VS 2262 Instruction Manual Download Page 19

Page: 19 / 24

Cleaning the appliance including interior

•

Clean the appliance interior, the exterior surfaces,
the accessories and the door seal regularly with
warm water and mild detergent; or with a clean,
damp microfibre cloth without cleaning agent.

•

Remove the appliance content and storage it at a
cool location.

•

Clean the thaw water discharge channel / opening
carefully e.g. with a pipe cleaner.

•

After everything was thoroughly dried, you can
restart the operation.

Defrosting

CAUTION:

Never use metal objects (e.g. knifes) to remove ice
from the evaporator. Otherwise it can be damaged.
A defect evaporator can cause serious damage.

The appliance has an automatic defrosting system.
During defrosting water drops drains off at the back
of the cooling chamber. The thaw water running
through a channel, is collected in a drip tray located
on the compressor, where it will evaporate. Make
sure the water discharge opening does not get
clogged. A light formation of ice on the interior back
during operation is normal.

Changing the bulb

Lamp data:

Lamp data: max. 1

max. 1

max. 10000 W / 220

W / 220

W / 220----240 V~

240 V~

•

Loosen the screw and remove the remove the
lamp cover carefully.

•

Change the defective bulb.

•

Replace the lamp cover properly and fix it.

Troubleshooting

Before you contact an authorized specialist

Problem

roblem

Cause / Action

Appliance is
not working
properly or
at all

∙ Check the power supply / temperature
setting / ambient temperature.
∙ Unblock the ventilation openings,
install the appliance freely.

Loading is
too warm

∙ Check the temperature setting / ambi-
ent temperature. ∙ Open the door only
as long as necessary.

Loud noise
during oper-
ation

∙ Check the appliance position.
∙ See the section “Operating noise”.

Water on the
appliance
bottom

∙ Check the temperature setting /

water

discharge channel or opening.

Light does
not work

∙ Check the power supply.
∙ See “Changing the bulb”.

NOTE:

If a problem still persists after following the steps
above, contact your trader or an authorized techni-
cian.

Technical Data

Electrical conne

Electrical connecccction………………...………………

tion………………...………………

tion………………...…………………..

…..

Power voltage: ………………......….220-240 V~ / 50 Hz
Connection power: ……………………….…...…..…55 W

Dimension H x W x D / Weight…..…...………………..

Dimension H x W x D / Weight…..…...………………..
Appliance size: ……..………....…..85.3 x 47.4 x 44.6 cm
Net weight: …………………………..……approx. 22.0 kg

The right to make technical and design modifications
in the course of continuous product development
remains reserved.

This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.