8
03/2014
Disconnect the plug or turn off the fuse!
- Remove the screw from the lamp cover.
- Press on the lamp cover and remove to the back.
- Replace defect illuminant.
- Reattach the lamp cover and fasten the screw.
- Reconnect the device and turn on.
Repairs
WARNING
Servicing of electric devices must be conducted by qualified experts only. Incorrect or improper repairs
constitute a risk for the user and will void the warranty!
What if . . . Troubleshooting
The design of the device ensures a trouble-free operation as well as a long life cycle. Nevertheless, if
any defect occurs during operation, please check if it is caused by improper operation.
The following problems can be solved by you by checking for the possible cause.
PROBLEM
POSSIBLE CAUSE
SOLUTION
The device is
not
working
properly or at
all
Is the plug securely connected to the mains?
Has the safety mechanism of the wall socket
been triggered?
Is the temperature control properly set?
Is the place unqualified?
Do food items or shelves and/or drawers prevent
the door from closing properly?
Is the ventilation of the device hedged?
Connect the plug properly to the socket, turn on
the fuse, and contact a technician if necessary.
Check the settings.
Check the ambient temperature.
Arrange the food or shelves and/or drawers
properly.
Clear the ventilation slits, install the device freely
Loud
noise
during opera-
tion
Does the device not stand vertical or horizontal? Adjust the feet accordingly.
Liquid flow sounds in the cooling circuit are
normal.
Water on the
bottom
Is the temperature control set properly?
Check the temperature settings.
Interior
lamp
does not work
Is the plug not connected to the mains?
Has the safety mechanism of the wall socket
been triggered?
Is the illuminant defect?
Connect the plug properly to the socket, turn on
the fuse, and contact a technician if necessary.
Disconnect the plug and replace the illuminant
(refer to ‘Replacing the bulb’).
Note:
On days of high humidity, condensation might occur on the outer surface of the device. This is
no malfunction; you may simply wipe the water off.
If a problem still persists after following the steps above, please contact your distributor or a techni-
cian.