BOMANN KS 197, Instruction Manual, Page: 27 / 32

27
CAUTION
CAUTION CAUTION
CAUTION::::
•
Do not use a wire brush or any abrasive items.
•
Do not use any acidic or abrasive detergents.
•
Essential oils and organic solvents, such as the juice of lemon or orange skin, butanoic acid or
cleaning agents containing acetic acid can damage plastic parts. Prevent contact of any part with
such substances.
•
Do not bend the cooling coils.
For hygienic reasons, clean the interior and accessory parts regularly:
For hygienic reasons, clean the interior and accessory parts regularly: For hygienic reasons, clean the interior and accessory parts regularly:
For hygienic reasons, clean the interior and accessory parts regularly:
•
Remove all food and keep covered at a cool location.
•
Use warm water and a mild detergent for cleaning the interior (including rear side and bottom).
•
Clean the water discharge opening carefully with a pipe cleaner or knitting needle.
•
After everything was thoroughly dried, you can restart the operation.
Reverse the bulb Reverse the bulb Reverse the bulb Reverse the bulb
Lamp specifications:
Lamp specifications: Lamp specifications:
Lamp specifications: 220
220 220
220----240 V, max. 15 W
240 V, max. 15 W 240 V, max. 15 W
240 V, max. 15 W
•
Remove the screw from the lamp cover.
•
Press on the lamp cover and remove to the back.
•
Replace the defect illuminant.
•
Reattach the lamp cover and fasten the screw.
•
Reconnect the device and turn on.
Repairs Repairs Repairs Repairs
A wrong or improperly performed repair brings danger to the user.
Repairs to electrical appliances must only be carried out by an authorized specialist. A damaged pow-
er cord must be changed only by a qualified electrician.
Troubleshooting
Troubleshooting Troubleshooting
Troubleshooting
Before you contact an authorized specialist Before you contact an authorized specialist Before you contact an authorized specialist Before you contact an authorized specialist
You need the service may not call if you read this troubleshooting table.
Problem
Problem Problem
Problem Possible cause
Possible cause Possible cause
Possible cause Solution
Solution Solution
Solution
The device is
not working
properly or at
all.
-
Is the unit not connected to mains power?
-
Is the temperature control properly set?
-
Is the place unqualified?
-
Do food items prevent the device door from
closing properly?
-
Are the ventilation openings clear of ob-
struction?
-
Insert the plug properly in the contact sock-
et. Check the fuse.
-
Check the temperature setting.
-
Check the ambient temperature.
-
Arrange the food properly.
-
Unblock the ventilation openings, install the
device freely.