BOMANN KG 7321, Instruction Manual, Page: 28 / 40

28
sumption. Enough clearance is nec-
essary.
-
Gap to the back and to the side
walls each approx. 10 cm;
-
Place the appliance so that the ap-
pliance door can open without being
impeded.
•
Only install at a location with an am-
bient temperature suitable for the cli-
mate class of the appliance. For in-
formation on the climate class, please
refer to the “EU Product Data Sheet”
or to the rating label located in the in-
terior or on the appliance rear.
•
Place the appliance on a steady and
safe surface. If the appliance is not
horizontally leveled, adjust the feet
accordingly.
•
Av
Av Av
Avoid t
oid t oid t
oid the install
he install he install
he installation:
ation: ation:
ation:
-
near heaters, next to a stove, direct
sunlight or any other heat sources;
-
at locations with high humidity (e.g.
outdoors, bathroom), as metal parts
would be susceptible to corrosion
under such circumstances;
-
near volatile or flammable materials
(e.g. gas, fuel, alcohol, paint, etc.),
in rooms which may have poor air
circulation (e.g. garages).
-
Do not expose the appliance any
weather.
Electrical connection Electrical connection Electrical connection Electrical connection
WARNING: WARNING: WARNING: WARNING:
•
The installation to the mains supply
must conform to the local standards
and regulations.
•
Improper connection may cause to an
electric shock
electric shock electric shock
electric shock!
•
Do not modify the appliance plug. If
the plug does not fit properly to the
outlet, let install a proper outlet by an
authorized specialist.
•
The accessibility of the power plug
must be ensured to disconnect the
appliance from the power supply in
case of emergency.
•
Make sure that the voltage supply
matches the specifications on the rat-
ing label before connecting.
•
Connect the mains cable to a properly
installed and earthed wall outlet.
•
If the plug after installation is not
accessible, a corresponding discon-
nect device must be available to meet
the relevant safety regulations.