BOMANN KG 7304, Instruction Manual, Page: 26 / 36

26
Electrical connection Electrical connection Electrical connection Electrical connection
WARNING: WARNING: WARNING: WARNING:
•
The installation to the mains supply
must conform to the local standards
and regulations.
•
Improper connection may cause to an
electric shock
electric shock electric shock electric shock!
•
Do not modify the appliance plug. If
the plug does not fit properly to the
outlet, let install a proper outlet by an
authorized specialist.
•
The accessibility of the power plug
must be ensured to disconnect the
appliance from the power supply in
case of emergency.
•
Make sure that the voltage supply
matches the specifications on the
rating label before connecting.
•
Connect the mains cable to a properly
installed and earthed wall outlet.
•
If the plug after installation is not
accessible, a corresponding discon-
nect device must be available to meet
the relevant safety regulations.
Reverse the door opening Reverse the door opening Reverse the door opening Reverse the door openingssss
If required, the door openings can be
moved from the right (supplied condition)
to the left side.
WARNING: WARNING: WARNING: WARNING:
When replacing the door stops, the appli-
ance must be disconnected from the
power supply first.
NOTE
NOTE NOTE
NOTE::::
•
Ask another person to assist.
•
You possibly need:
screw wrench,
Phillips screwdriver as well as a thin-
blade screwdriver.
•
(1) Remove the hinge cover.
•
(2) Disassemble the upper device
hinge; lift the upper device door out.
•
(3) Move the blind plug on the top of
the door.
•
(4) Release the doorstop (a) and
fasten the supplied doorstop (b) on
the underside of the door. Set the
door aside safely.
NOTE
NOTE NOTE
NOTE::::
Store the doorstop (a) for another
possible door stop change
•
(5) Disassemble the middle door
hinge; lift out the lower device door.