32
Tips for Energy saving
Tips for Energy saving
Tips for Energy saving
Tips for Energy saving
•
Disconnect the appliance from the
power supply, if it isn’t in use.
•
Do not install the appliance near
stoves, heaters or other heat sources.
In case of higher ambient tempera-
tures, the compressor will run more
frequently and longer.
•
Ensure sufficient ventilation at the
bottom and rear side. Never block
ventilation openings.
•
Do not adjust the temperature colder
than necessary.
•
Do not leave open the door for longer
than required.
•
The appliance should be defrosted
regularly, if necessary.
•
The seal of the appliance door must
be completely intact, so that the door
closes properly.
Cleaning and Maintenance
Cleaning and Maintenance
Cleaning and Maintenance
Cleaning and Maintenance
WARNING:
WARNING:
WARNING:
WARNING:
•
Always disconnect the appliance from
the power supply before cleaning and
user maintenance.
•
Do not use steam cleaners for clean-
ing the appliance; moisture could en-
ter electrical components. Risk of
Risk of
Risk of
Risk of
electric shock!
electric shock!
electric shock!
electric shock! Hot steam could dam-
age the plastic parts.
•
The appliance must be dry before
restarting operation.
CAUTION:
CAUTION:
CAUTION:
CAUTION:
•
Do not use a wire brush or other
sharp, abrasive items.
•
Do not use any acidic or abrasive
detergents.
•
Do not damage the refrigerant circuit.
Cleaning the appliance including int
Cleaning the appliance including int
Cleaning the appliance including int
Cleaning the appliance including inteeeerior
rior
rior
rior
•
Clean the appliance interior, the exte-
rior surfaces, the accessories and the
door seal regularly with warm water
and mild detergent; or with a clean,
damp microfibre cloth without
cleaning agent.
•
Remove the appliance content and
storage it at a cool location.
•
Clean the thaw water discharge
channel / opening carefully e.g. with a
pipe cleaner.
•
After everything was thoroughly dried,
you can restart the operation.