9
Fill in the salt
Fill in the salt
Fill in the salt
Fill in the salt
CAUTION:
CAUTION:
CAUTION:
CAUTION:
•
Only refill the salt container when the salt warning lamp is lighting.
•
During filling the salt container, salt and water can escape. Start a program immediately after you have
filled the container to prevent corrosion.
•
Remove the lower basket and unscrew the lid of the salt container.
•
Add about 1.5 kg of salt by using the supplied funnel tube.
•
Full fill the salt container with water (just before the first use).
•
Screw the lid firmly on again after filling the container.
•
Depending on salt resolution, the warning lamp usually disappears immediately after filling.
B
BB
B. . . .
Fill the rinse aid dispenser
Fill the rinse aid dispenser
Fill the rinse aid dispenser
Fill the rinse aid dispenser
Function of rinse aid
Function of rinse aid
Function of rinse aid
Function of rinse aid
The rinse aid is automatically added during the final rinse, ensuring thorough rinsing and a spot and streak
free drying.
When to refill the rinse aid dispenser
When to refill the rinse aid dispenser
When to refill the rinse aid dispenser
When to refill the rinse aid dispenser
As long as the corresponding message does not light up in the display, you can estimate the
amount of remaining rinse aid to the optical level indicator (C
C
C
C) next to the dispenser.
When the rinse aid dispenser is full, the indicator is completely dark. If the rinse aid diminishes, the size of the
black dot changes as shown below. In order to avoid spotting, the rinse aid level must not drop below ¼.
full
¾ full
½ full
¼ full – refill
empty
Fill in the rinse aid
Fill in the rinse aid
Fill in the rinse aid
Fill in the rinse aid
•
To open the dispenser screw the lid counterclockwise to the open posi-
tion (left arrow) and remove the lid.
•
Add the rinse aid into the dispenser, being careful not to overfill.
The dispenser contains approx. 110 ml.
•
Before closing the appliance door, put on the lid in the open position back and turn it clockwise to the
closed position (right arrow).
NOTE
NOTE
NOTE
NOTE::::
Remove spilled rinse aid with an absorbent cloth to avoid excessive foaming during the next rinse.
Adjusting the rinse aid dosage
Adjusting the rinse aid dosage
Adjusting the rinse aid dosage
Adjusting the rinse aid dosage
When forming spots and the dishes dries poorly, increase the added amount of rinse aid. You can set the
amount of addition between level 1 (min.) and level 6 (max.).
Take off the lid of the rinse aid dispenser and adjust the dial to the desired level.
The factory setting is 4.
