Bomag BW 213 D-4, Operating Instructions, Maintenance Instructions

Page: 62 / 102

Every 250 operating hours
BOMAG
62
BW 213 D-4
Cleaning with cold cleansing agent
! Caution
Protect electrical equipment such as genera-
tor, regulator and starter against the direct wa-
ter jet.
l
Spray the engine with a suitable cleansing
agent, e.g. cold cleanser, let it soak in for a
while and spray it off with a strong water jet.
l
Run the engine warm for a while to avoid cor-
rosion.
5.14 Check the oil level in the
drive axle
l
Park the machine on level ground.
Fig. 78
l
Unscrew the oil level inspection plug (Fig. 78)
and check the oil level.
i Note
The second level inspection plug as at the back.
After filling in oil wait until the oil has evenly distrib-
uted inside the axle.
The oil level must reach the bottom edge of the
level bore.
l
Top up oil, if necessary.
For quality of oil refer to the table of fuels and
lubricants.
l
Turn the level inspection plug tightly back in.