4
2.4 Camera Modes
The different modes are accessed by sliding the power
switch to the different positions marked on the camera.
The power switch is located inside the camera on the
bottom right of the LCD screen.
The different camera modes are as follows:
OFF Mode
Turns the camera off. The camera will still consume a
small amount of power while in OFF mode. It is
recommended to remove the batteries if the camera
will not be used for a long period of time.
TEST/SETUP Mode
In this mode, the camera allows you to customize the
camera settings or play back pictures and videos the
camera has taken on the LCD display.
ON Mode [ Hunting Mode ]
Camera will take pictures or video when motion is
detected and/or at specific time intervals, according
to the programmed settings. After switching the
camera to the ON position, the red LED motion
indicator will blink for about 10 seconds and then
turn off. This preset time allows you to adjust the
cameras position if needed, before the camera
becomes active.