Bolton Tools ZX1048P, Operation Instruction Manual, Page: 10 / 38

(2)Micro feeding of main axle:
Puch on the micro-feeding clutch handle,keep it engaged then rotate
micro-feeding hand wheel.
(3)Position fixed of main axle:
If you want to fix position of main axle,loose the position fixed bolt,set
the bolt on the needed position and tight it.If you don
’
t need fix
position,you must position,you must loose the fix position bolt.
8.Milling
Y
ou can use upright or key slot milling cutter from φ
4 to
φ
6, when the
diameter is more than
φ
20,you can directly use M’
Scone handle milling curter
or key slot cutter. If the milling surface is large enough, you can install
section milling cutter.
9.Drilling.
This kind of machine is supplied with drill chuck,reduction sleeve and
connecting bar,So as to drilling,reaming different holes.
10.Boring.
This king of machine can bore different diameter holes.
11.Grinding.
With grinding wheel,the machine can grind surface of all kinds of steel
piece,cost iron and swallow-tailed guide.
Ⅴ
.Lubrication of machine.