Bolin Technology SD500 Series, User Manual

Page: 47 / 62

47
Importing and Exporting System Configuration File
Export the current configurations of the camera and save them to the PC or an external storage medium. You can
also quickly restore configurations by importing backup configurations stored on the PC or an external storage
medium back to the camera.
CAUTION:

After you perform the Default operation, all settings are restored to factory defaults, except the following: login
password of the system administrator, network settings, and system time.

Make sure you import the correct configuration file for your camera. Otherwise, unexpected results may occur.

The camera will restart when the configuration file is imported successfully.
1. Click Setup > System > Maintenance .
2. To import configurations that you have backed up, click Browse next to the Import button and select
the configurations you want to import, and then click Import . The result will be displayed.
3. To export configurations, click Browse next to the Export button, select the destination folder, and
then click Export .
4. To restore default configurations, click Default and then confirm the operation. The device will restart
and restore the default configurations.
Collecting Diagnostic Information
Diagnostic information includes logs and system configurations. You can export diagnostic information to your
PC.
1. Click Setup > System > Maintenance .
2. Under Diagnosis Info , click Browse to select the destination folder, and then click Download to save
the diagnostic information to the specified folder.
NOTE:

Diagnostic information is exported to the local folder in form of a compressed file. You need to decompress the file
using a tool such as WinRAR and then open the file using a text editor.

Select Collect Image Debugging Info. Then the recording and the debugging information can be displayed
synchronously for convenient troubleshooting.
Digital Zoom & Focus Configuration
Min. Focus Distance
The device can adjust the speed of auto-focus according to the minimum focus distance. In order to shoot clear
objects, it is recommended that the minimum focus distance is set shorter than the distance between the objects and
lens, for example, if the minimum focus distance is 3m, then the objects within 3m from lens will be out of focus.