15
Table: Audio input & output relationship
Audio Input
SDI Audio
Embedded
HDMI Audio
Embedded
HDBaseT Audio Output
IP Audio
Output
*Audio
Line- out
Mic Built-in
NO
NO
NO
NO
YES, IP Audio
Audio Line-
In
YES
YES
YES, Audio Line-out &
HDMI Audio embedded
YES
YES, IP Audio
SD Card (Not Activate, for future supported by software upgrade)
Micro SD card can be inserted to the camera for local recording.
•
Ensure that the Micro SD card’s pins are faced downward (logo faced
up)
•
Slide the card into the slot, and click into place
•
To remove the card, click inward, and it will pop outward and may be
removed
•
See Manual part 2 for more information regarding SD recording
Currently, the following Micro SD cards are supported:
Camera Initial setting status Information
Information of the camera initial setting status will display for 5 seconds.
1.
Camera PELCO ID for RS-485 control
2.
Camera VISCA ID for RS-422/232 control
3.
Camera ID for IR Remote Controller
4.
IR remote control signal receive current setting
5.
Baud Rate current setting
6.
Control COMM Port current setting
7.
HDMI video format current setting
8.
HDMI current setting
9.
Model number
10.
MCU firmware version
11.
FPGA firmware version
PELCO ID
1
VISCA ID 1
IR ID
01
IR-RECEIVE
ON
BAUD RATE
9600
COMM TYPE
232
FORMAT
2160P29.97
HDMI OUT RGB
MODEL TYPE
----
MCU FW: V0B210B32010AA006
FPGA FW: V027 4K
Camera Status Info Display