9
Remote Controller
1. Power
•
Power ON the camera to turn the camera in operation
status.
•
Power OFF the camera to turn the camera in
standby status.
•
When the camera is powered OFF, the camera turns to
the back and would be on standby mode.
•
When the camera is powered ON, the camera turns to
the front.
•
Powering the camera ON/OFF would not restart the
camera.
2. Camera ID (Total 3) Selector
3. Preset Position (Total 6) Calling and Setting
4. PAN-TILT
•
Pan and Tilt direction control
•
HOME: Home position, Resolution reset
5. L/R Direction Set
•
Left and right orientation setting
6. ZOOM/FOCUS
•
Far
•
Near
7. Auto/Manual Focus
8. Back Light
9. Video Format Switching
•
You can change the video format by keep pressing
the button. (When video format is changed, the
camera would restart and the screen turns black
for few seconds.)
10. MENU
•
On screen menu display ON/OFF
11. Audio Switch
•
You can turn the Mic built in the camera Off/ON by pressing the button once.
12. Fast/Slow Zooming Speed Switching
13. White Balance
•
Change the White Balance setting by pressing the button.
14. De-Flicker
•
When you find the video flicking, press the button once to eliminate the flickers.
Notes
•
3V CR2032 Coin lithium Battery is not included with the remote controller.
•
3V CR2032 Coin lithium batteries are not re-changeable.
