Hard Disk Mobile DVR User Manual V2.2
12
2.5 Power Cable
Power cable as picture 9,one end is 6pin white plug , it connect with the 6pin white plug of device back
panel. The red and black cables are directly connect to the vehicle's battery. Red cable connect to
positive , black cable connect to negative . Yellow cable is FIREWIRE. The device will automatically
start when turn on the vehicle key ,and close when turn off the vehicle key . Yellow cable is connected
to the gear that vehicle key open all the dashboard light(the gear of starting vehicle motor ).
Notes
:
1
)
Before connecting, confirm the voltage is between 8V
—36V or else ,if over this range ,the device will
be fired
2
)
After connecting the cables, Ensure that power cables are insulated to prevent short circuiting and
burning out the battery.
3
)
The Yellow cable must be connected to the vehicle ignition cable, otherwise the device will not be
able to execute the delayed shutdown and the final moment of the video will be lost.
4
)
Note: Connection to the vehicle's engine must be connected directly to the positive anode of the
battery. Do Not Use bond strap for grounding as it will produce negative pulses that would interfere the
device's normal operation. The negative pole of the power code must be Φ1.5mm and above.
Summary of Contents for MVR9004/8
Page 1: ...1 User Manual for GPS 3G 4G 4 8ch D1 Hard Disk Mobile Digital Video Recorder MDVR Model ...
Page 8: ...Hard Disk Mobile DVR User Manual V2 2 8 2 2 Device drawing Dimension Install Holes ...
Page 20: ...Hard Disk Mobile DVR User Manual V2 2 20 3 2 Text Input 3 3 Video settings ...
Page 21: ...Hard Disk Mobile DVR User Manual V2 2 21 3 4 PTZ connection way and setting ...