Installation
1. Place the holster against the wall and, using the screws provided, attach the
power supply holster to the wall.
2. Insert the power supply into the holster.
3. Connect the plug-in DC cable and wire tie it to the holster.
4. Connect the AC line cord and wire tie it to the side of the holster opposite the
DC cable.
24V Power Supply
Model SPS2454
Specifications subject to change without notice.
© 2004 Bogen Communications, Inc.
Part No. 54-2
11
8-0
1
A
0407
54-2118-01A.qxp 7/13/2004 1:50 PM Page 1
