10
3.4
Zone Paging
You can choose to page only certain areas of the facility, called zones.
The zones, which are collections of stations, must be created through
the Web-based System Admin User Interface (UI) before zone paging
from the VoIP Phone can occur. Zones appear in the phone’s Direc-
tory under the Paging menu. The Paging menu also includes entries
for Facility Paging when applicable.
To make a zone page:
Step 1
Select the soft key labeled
Directory
.
Step 2
Use the navigation keys to select
Paging
and then
press
OK
.
Step 3
Select
Zone.
Step 4
Talk into the handset, or if using the speakerphone or
headset, talk into the microphone.
Step 5
Hang up when finished.
4
Making Calls
The steps for making calls depend on whether you are making the
call from the display and speaker or from the handset and whether
you know the extension that you want to call.
To make a call by dialing the extension number:
Step 1
Dial the extension.
Step 2
Select
Send
.
Step 3
When the call is completed, hang up.
Note:
The
Directory/Stations
submenu is only available on
Nyquist E7000.
