8
Configuration Settings Tab Parameters
The easiest way to configure Nyquist appliances is to obtain configuration settings from
the Nyquist server by selecting
Get Configuration From Server
. However, you can man
-
ually configure an appliance through the appliance’s Web UI when Standalone Operation
is enabled (see
"Standalone Operation Configuration Settings” on page
).
To manually configure your Nyquist appliance:
1
On the appliance Web UI’s main page, select
Configuration Settings
.
2
Select or view the settings as described in Table
10 for normal configura
-
tion, or Table
12 for Standalone Operation configuration.
3
Select
Save
.
DHCP Enabled
Indicates if the device is enabled to use DHCP to
retrieve its IP configuration.
Reboot Appliance
Indicates that this appliance should reboot when the
Save button is clicked.
Table 3, Network Settings (Continued)
