Bogen Nyquist C4000 Series User Manual Download Page 59

Page: 59 / 146

• A page or queued page is already playing to a zone.
• An Emergency-All-Call, All-Call, Alarm, or Tone is already playing.

If you attempt to play an emergency announcement to a zone or to

All Speakers

, you will receive a busy signal if any of the following are

true:
• An emergency announcement is already playing to the zone or to

All Speakers

• An Emergency All-Call is already playing.

If you attempt to play an emergency announcement to a zone or to

All Speakers

that is already playing a non-emergency announce-

ment, an alarm or tone, a page or queued page, or an All-Call, the

emergency announcement takes priority. A currently playing non-

emergency announcement, alarm or tone, page or queued page, or

All-Call will stop playing.
An

Emergency

announcement can be played on a zone while a

Normal announcement plays on a different zone. Multiple

Emer-

gency

and

Normal

announcements can be played to different zones

(but not to

All Speakers

3.3

Adding an Announcement

If the permission and CoS settings allow, you can upload an

announcement, which can be an audio recording, such as a message

or tone. The announcement can be scheduled to play at certain times

and in certain zones.
Through the Add Announcement page, you can also enter text to be

converted into speech provided you have the feature license that

allows this option.

Note:

The navigation bar does not appear if you are not authorized

to make changes to the C4000 configuration. Contact your system

administrator or refer to the

Nyquist C4000 System Administrator

Manual

Summary of Contents for Nyquist C4000 Series


















































































































































Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands

Bogen Nyquist C4000 Series, User Manual

Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands