Bogen Nyquist C4000 Series User Manual Download Page 34

Page: 34 / 146

Table 2-5, Add Playlist Parameters

Name

Displays the user provided name for the playlist.

Note:

Valid characters include uppercase letters (A-Z), low-

ercase letters (a-z), numerals (0-9), space, and the following

special characters:

!@$*?-.,

Scheduled Audio
Repeat

When enabled, the playlist audio will be repeated after all

songs have been played. When disabled, Scheduled Audio

will automatically stop after the last song has been played

from the playlist. When disabled, a corresponding stop

event is not needed when Scheduled Audio is started via

the schedule.

Note:

When playlists are being used by the Audio Distribu-

tion feature, the Scheduled Audio options are ignored.

Scheduled Audio Shuf-
fle

When enabled, the order in which the songs are played is

shuffled. When disabled, the playlist songs will be played in

the order that they appear in the playlist.

Note:

When playlists are being used by the Audio Distribu-

tion feature, the Scheduled Audio options are ignored.

Description

When

Show

is selected, the user provided description of

the play list appears.

Note:

Valid characters include uppercase letters (A-Z), low-

ercase letters (a-z), numerals (0-9), space, and the following

special characters:

!@$*?-.,

Summary of Contents for Nyquist C4000 Series


















































































































































Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands

Bogen Nyquist C4000 Series, User Manual

Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands