Bogen Nyquist C4000 Series User Manual Download Page 30

Page: 30 / 146

2.2.5

Editing Song Information

Through the Edit Song page, you can edit the information that

appears on the Songs page for a particular song or replace the down-

loaded file with another.

To edit the information associated with the song file:

Step 1

On the navigation bar, expand

Audio

Step 2

Select

Songs

Step 3

On the Songs page, select the

Edit

icon next to the

song that you want to edit information for.

Step 4

On the Edit Song page, make changes to the parame-
ters.

Step 5

After completing all changes, select

Save

2.2.6

Deleting a Song

Through the Songs page, you can delete a song from your C4000 sys-

tem. If you delete a song that is in a Playlist, the song is automatically

removed from the Playlist.

To delete a song:

Step 1

On the navigation bar, expand

Audio

Step 2

Select

Songs

Step 3

On the Songs page, select the

Delete

icon next to the

song that you want to delete.

Table 2-3, Edit Song Page Parameters

Title

Displays the user provided song title.

Artist

Displays the name of the musician performing the song.

Album

Displays the name of the album the song is from.

Track Number

Displays the track on the album for the song.

Year

Displays the year the song was recorded.

Genre

Displays the music genre, or category, for the song.

File Upload

Allows you to select the song that you want to upload.

Playlists

Allows you to add or remove the song from playlists.

Summary of Contents for Nyquist C4000 Series


















































































































































Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands

Bogen Nyquist C4000 Series, User Manual

Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands