Bogen Nyquist C4000 Series User Manual Download Page 29

Page: 29 / 146

keys when selecting multiple files. Parameters do not
appear when using the

Multiple Songs

option.

Step 5

After completing all changes, select

Save

The song or

songs will be copied onto the Nyquist system.

Figure 2-7, Adding Multiple Songs

Table 2-2, Add Song Page Parameters

Multiple Songs

Allows you to select multiple songs.

Title

Displays the user provided song title.

Artist

Displays the name of the musician performing the song.

Album

Displays the name of the album the song is from.

Track Number

Displays the track on the album for the song.

Year

Displays the year the song was recorded.

Genre

Displays the music genre, or category, for the song.

File Upload

Allows you to select the song that you want to upload.

Playlists

Select the playlists that you want to add the song to. You

can select multiple playlists, select all playlists by selecting

Add All

, or use the

Clear

button to remove the playlists.

File Upload

Select

Choose file

and navigate to select the file to upload.

This option allows you to select files not only from your

computer but also from a USB flash drive inserted in your

computer.

Summary of Contents for Nyquist C4000 Series


















































































































































Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands

Bogen Nyquist C4000 Series, User Manual

Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands