Bogen Nyquist C4000 Series User Manual Download Page 19

Page: 19 / 146

1.2

Getting Help

Help is available through the C4000 Admin Web UI and through

Bogen’s Technical Support. Technical Support is available between

8:30 am and 6:00 pm, and on-call until 8 pm, Monday through Friday.

Technical Support contact information is as follows:

Tel: 1-800-999-2809

Fax: 201-934-6532

Email: [email protected]

Online help is accessed from the menu that appears in the top right

portion of the Admin Web UI’s navigation pane. The menu contains

the following options:
•

About

– Selecting this option displays the version number and

contact information for Bogen Communications, Inc.

•

Help Topics

– Selecting this option

•

Admin Manual

– Selecting this option displays the

Nyquist C4000

System Administrator Manual

. The

Nyquist C4000 System Adminis-

trator Manual

provides configuration and task information that

you may not be authorized to perform.

•

Logout

– Selecting this option logs you out of C4000.

Figure 1-7, Help Menu

Summary of Contents for Nyquist C4000 Series


















































































































































Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands

Bogen Nyquist C4000 Series, User Manual

Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands