Bogen Nyquist C4000 Series User Manual Download Page 126

Page: 126 / 146

114

Table 7-1, Display Message Options

Text

Type the message that is to appear on the

display monitor.
You can format text using basic HTML tags,

such as:
• <b> for bold
• <i> for italic
• <u> for underline

Expiration Mode

Select the mode for setting the message’s

expiration. Options are:
•

Display Time

. Uses

Display Time (sec-

onds)

to set the expiration.

•

Manually Removed

. Sets the expiration

time to Never. You must use the

Remove

Message

button remove a message from

the message queue, or the message can
be removed by a Routine Action using the
display message

Identifier

•

Date/Time

. By default, the current date

and time appears in the

Date/Time

field.

Display Time
(seconds)

Appears only if

Expiration Mode

is set to

Display Time

. Sets the length of time for the

message to be displayed before it expires.

Time can range from 1 to 99999.

Date/Time

Appears only if

Expiration Mode

is set to

Date/Time

. By default is set to the current

date and time. To change the date, select the

calendar and pick the date and time.

Zones

Select the zone or zones. Messages will be

sent to the display devices in the selected

zones.

Stations

The message is sent to the specified stations

and any stations that belong to the specified

zones.

Identifier

Used to identify the message so it can be

deleted by a Routine action.

Summary of Contents for Nyquist C4000 Series


















































































































































Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands

Bogen Nyquist C4000 Series, User Manual

Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands