Description
Features
• Wide-dispersion coaxial driver for broad, even
1
40° coverage
• Stable, high definition metal-alloy cone
• MDT™ cone design delivers detailed sound
• MLS™ eliminates conventional centering “spider” for
more accurate voice coil centering
• High-efficiency drivers deliver superior performance
• Extremely good off-axis response
• Computer-matched venting system for full bass output
• High power handling capability for foreground sound
• Selectable power taps via front-mounted control
•
1
6-ohm input for non-transformer multi-speaker systems
• Easy wiring with snap-on connector
• Connector provides loop-through to next speaker
• Attachment point for seismic cable (safety cable)
• Input terminal cover with knockouts and safety eyelet
provides protection for connections
• Low-resonance cabinet structure
• Off-white textured finish; easily painted to match theme
decors
• Attractive, contemporary, sturdy steel grille assembly with
fine perforation(s)
• Accessory tile bridge support ring (Model TBCR sold
separately)
• Accessory
1
0-foot long cable kit (Model CK
1
0 sold
separately)
The Orbit Ceiling Speaker (OCS
1
) is the ideal choice for various
types of ceiling environments.
The OCS
1
features NEAR's MLS™ and MDT™ technologies
(see below), which improve sound quality and increase operating
reliability.
The low-distortion speaker design, featuring NEAR's spiderless
driver and one-piece metal-alloy cone structure, delivers superb
articulation and the highest intelligibility for both music and
speech.
The speaker can be easily installed on hard surfaced ceilings, or
in suspended ceilings and new construction (with the optional
TBCR bracket).
MDT™ (Metal Diaphragm Technology)
• Solid, one-piece cone structure eliminates the traditional
dust cap
• Extremely stable cone structure over long periods of time
• Fast transmission of sound through the diaphragm means
low energy storage
• Special hard anodizing process creates a ceramic surface for
increased stiffness
• Super-efficient thermal path for cooling the voice coil
(not paper or plastic)
• High rigidity and low mass of metal versus typical paper or
plastic cones
MLS™ (Magnetic Liquid Suspension)
• Magnetic liquid (Ferrofluid) injected into magnet gap
• Elimination of the conventional cloth centering spider
• Constant lubrication of the gap prevents oxidation from
occurring
• Voice coil is most efficiently cooled by fluid path rather
than air
• Lower distortion via stronger centering forces on voice coil
• Increased reliability, particularly in high power daily use
systems
Specifications subject to change without notice.
© 2003 Bogen Communications, Inc.
Part No. 54-80
1
6-0
1
B 07
1
2
Orbit
Ceiling Speaker
Model OCS
1
