background image

9

Output Power

............................ 40W RMS; Minimum 1 kHz @ rated distortion;

Continuous operation at 1/3 of Full Rated Power (FRP)

Frequency Response

Balanced LINE/MIC

................ 100 Hz to 20 kHz; 0/-3 dB

Unbalanced Input

.................. 80 Hz to 20 kHz;  0/-3 dB

Distortion  

Balanced LINE/MIC

................ < 1% THD+N; Maximum, Full rated bandwidth

Unbalanced Input

.................. < 1% THD+N; Maximum, Full rated bandwidth

Output Regulation

.................... 2 dBr or better no-load to full-load

Output Impedance

.................... 70V, 25V, 4 ohms, 8 ohms

REC Output

.............................. 1.14V @ FRP

Maximum Sensitivity

Balanced MIC

........................ 1.5 mVrms (200 ohms)

Balanced LINE

........................ 150 mVrms (200 ohms)

Unbalanced RCA Input

.......... 100 mVrms (10K ohms)

Maximum Input Level

Balanced MIC

........................ 100 mVrms

Balanced LINE

........................ 6 Vrms

Unbalanced Input

.................. 5 Vrms

Signal to Noise AUX 

Fundamental

.......................... -74 dBr minimum referenced to FRP

Balanced MIC

........................ -59 dBr minimum referenced to FRP

Balanced LINE

........................ -70 dBr minimum referenced to FRP

Unbalanced Input

.................. -70 dBr minimum referenced to FRP

Bass & Treble 

Bass

........................................ +/- 10 dBr @ 100 Hz referenced to mid-band

Treble

.................................... +/- 10 dBr @ 10 kHz referenced to mid-band

VOX Trigger & Muting

Input 1 Trigger Level

............ 25mV

VOX Release Delay

.............. 4 (+/- 1) sec.

Muting Level

.......................... > -60 dBr

Phantom Power

........................ 12V DC min., 18V DC max.

Max. Ambient Temperature

...... 100 deg. F (non-condensing)

Thermal Emissions 

.................. 141.5 BTU/hr. (full power)

External Supply

........................ 24V DC; 3A

Dimensions

.............................. 8-1/4” W x 3-1/2” H x 10-3/8” D

Product Weight

........................ 10 lb.

Listings

...................................... Listed to UL Standard 60065 for US and Canada

Technical Specifications

Summary of Contents for CC4041













Reviews: