background image

Notice

Every effort was made to ensure that the information in this
guide was complete and accurate at the time of printing.
However, information is subject to change.

Important Safety Information

Always follow these basic safety precautions when installing and
using the unit:

1

. Read all instructions.

2. Follow all warnings and instructions marked on the product.
3. DO NOT place the product in a separate enclosure or cab-

inet, unless proper ventilation is provided.

4. Never spill liquid on the product.
5. Repair or service must be performed by a factory author-

ized repair facility.

6. DO NOT staple or otherwise attach the AC power supply

cord to building surfaces.

7. DO NOT use the product near water or in a wet or damp

place (such as a wet basement).

8. DO NOT use extension cords. The product must be

installed within 6 feet of a grounded outlet receptacle.

9. Use caution when installing or modifying paging or control

lines.

Applications Assistance

Our Applications Engineering Department is available to assist
you from 8:30 A.M. to 6:00 P.M. and on call until 8:00 P.M.,
Eastern Standard / Daylight Time, Monday through Friday. Call 

1

-

800-999-2809, Option 2.

Domestic and International Listings

The CAM2 is a UL, CSA listed product.

13

LIMITED WARRANTY

The Bogen CAM2 is warranted to be free from defects in material or workmanship provided that the product
has not been subjected to abuse or accident or altered in any way for two (2) years from the date of sale to the
original purchaser.Any part of the product covered by this warranty that, with normal installation and use,
becomes defective will be repaired or replaced by Bogen, at our option, provided the product is shipped insured
and prepaid to: Bogen Factory Service Department, 50 Spring Street, Ramsey, NJ 07446, USA.The product will be
returned to you freight prepaid.This warranty does not extend to any of our products that have been subjected
to abuse, misuse, improper storage, neglect, accident, improper installation or have been modified or repaired or
altered in any manner whatsoever, or where the serial number or date code has been removed or defaced.

THE FOREGOING LIMITED WARRANTY IS BOGEN’S SOLE AND EXCLUSIVE WARRANTY
AND THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY. BOGEN MAKES NO OTHER WAR-
RANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED
AND EXCLUDED TO THE MAXIMUM EXTENT ALLOWABLE BY LAW.

Bogen's liability arising out of

the manufacture, sale or supplying of products or their use or disposition, whether based upon warranty, contract,
tort or otherwise, shall be limited to the price of the product. In no event shall Bogen be liable for special, inciden-
tal or consequential damages (including, but not limited to, loss of profits, loss of data or loss of use damages) aris-
ing out of the manufacture, sale or supplying of products, even if Bogen has been advised of the possibility of such
damages or losses. Some States do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may
also have other rights which vary from State to State.

Products that are out of warranty will also be repaired by the Bogen Factory Service Department -- same address
as above or call 201-934-8500. The parts and labor involved in these repairs are warranted for 90 days when
repaired by the Bogen Factory Service Department. All shipping charges in addition to parts and labor charges will
be at the owner's expense.All returns require a Return Authorization number.

Summary of Contents for CAM2

















Reviews: