Description
The Bogen Model CA
1
9 is a momentary, rocker-type call switch
designed for use with Bogen Multicom 2000
®
Communication
Systems. The CA
1
9 will facilitate single-push call-in on the same
station and wiring as the Bogen enhanced staff stations (MCESS
or MCWESS) set to Level 4, 5, or 6. The CA
1
9 requires just two
conductors back to the system head-end. The CA
1
9 may also be
used for staff stations set to Levels
1
, 2, or 3. Any station using
the CA
1
9 must have an associated speaker.
Note
Requires special version Multicom Software V6.3 (MCPCA25W63).
Operation
When pushed once and released, the CA
1
9 will send two square
wave-pulses simulating the telephone going off-hook and on-
hook twice. This will establish a logged call into the designated
administrative station.The switch may also be used to initiate an
emergency call if pressed twice with a one-second interval
between presses.
Note
The CA
1
9 will operate only when the associated staff or enhanced
staff handset in is the on-hook position.
Caution
Observe color coding. The red wire connects to the station
annunciator point while the black wire connects to the station
ground point.
Installation
The CA
1
9 is designed for flush-mounted installation in a single-
gang box. The figure below illustrates the proper wiring
connections. Important: The shield must not be grounded at any
point other than the system head-end.
8
OHMS
CA19
PRESS
TO CALL
BLACK
RED
TO
CONSOLE
GROUND
ANNUNCIATOR
SPEAKER
SPEAKER
FIGURE - MODEL CA19, CONNECTING DIAGRAM
T 725
TRANSFORMER
ENHANCED
STAFF
STATION
JUNCTION
BOX
1/4 W
1/8 W
1/2 W
1 W
2 W
COM
4W
ROOM SPEAKER
BLU
GRN
YEL
ORN
RED
BRN
BLK
CALL-IN SWITCH
Model CA19
50 Spring Street, Ramsey, NJ 07446 U.S.A.
201-934-8500; FAX: 201-934-9832
www.bogen.com
Printed in U.S.A.
0011
2000 Bogen Communications, Inc.
54-5958-01R2
Specifications subject to change without notice.
