manualshive.com logo in svg

Bogen BAL2S, Specifications

Share
Download
Bogen BAL2S Specifications Download Page 1

Input Modules

Models BAL2S,
BRG1R, LMM1S,
LMR1S, MAX1R,
MIC1S, MIC2S,
MIC1X, MIC2X,
SAX1R, TBL1S,
TEL1S, TNG1S

Bogen’s advanced plug-in modules provide a wide range of functions to support a variety of applications.

These modules support different signal-source requirements, including the ability to interface to balanced and 
unbalanced high- and low-level inputs, stereo or mono, telco systems, and microphones.

BALANCED (BAL2S)

Stereo, balanced input module

• Stereo, high-impedance, balanced inputs
• Professional-quality, low noise performance
• Selectable gain of 0 or 

1

8 dB

• Mutable by higher priority modules
• Variable ducking level when muted
• Fade back from mute
• Screw terminal connections

BRIDGING (BRG

1

R)

Daisy chain multiple amplifiers input module

• Gain/Trim control
• Input signal available at buffered output
• Mute send & receive
• Variable ducking level when muted
• Fade back from mute
• 4 Priority levels
• Buffered output not mutable
• Bus assignable
• RCA input and output connectors

LINE/MIC (LMM

1

S, LMR

1

S)

LINE/MIC level input modules

• Gain control
• Bass & Treble controls
• Actively-balanced  input
• LINE/MIC Attenuator switch
• Gating w/Threshold & Duration
• 24V Phantom power supply
• 4 Priority levels
• Bus assignable
• Built-in limiter w/ LED (LMR

1

S)

• Remote control volume option (LMR

1

S)

• Single-gang remote control panel

included (LMR

1

S)

• Remote distance up to 2,000 Ft. (LMR

1

S)

• Screw terminal connectors

DESCRIPTION

FEATURES

©2005 Bogen Communications, Inc.
54-5093-0

1

D    0707

Specifications subject to change without notice.

MICROPHONES (MIC

1

S, MIC

1

X)

Transformer-balanced, low-impedance microphone
input modules

• Gain/Trim control
• Bass & Treble controls
• Noise gate w/Threshold & Duration
• Limiter w/Threshold control
• Limiter activity LED
• 24V Phantom power
• Mute send & receive
• 4 Priority levels
• Bus assignable
• Balanced, transformer-isolated
• Screw terminal (MIC

1

S); XLR connector

(MIC

1

X) models

MICROPHONES (MIC2S, MIC2X)

Electronic-balanced, low-impedance microphone
input modules

• Gain/Trim control
• High Cut/Low Cut controls
• Voice Enhancement control
• Noise gate w/Threshold control
• Limiter w/Threshold control
• 24V Phantom power
• Mute send & receive
• 4 Priority levels
• Bus assignable
• Electronically balanced
• Screw terminal (MIC2S); XLR connector

(MIC2X) models

MONO, STEREO AUX
(MAX

1

R, SAX

1

R)

Unbalanced input modules

• Gain/Trim control
• Bass & Treble controls
• Gating w/Threshold & Duration
• Mute send & receive
• Variable ducking level when muted/gated
• Fade back from mute/gate
• 4 Priority levels
• Bus assignable
• Stereo to mono summing option (SAX

1

R)

• RCA connectors

TRANSFORMER-BALANCED (TBL

1

S)

Transformer-balanced AUX input module

• Transformer-isolated line-level input
• Gain/Trim control
• Bass & Treble controls
• Gating w/Threshold & Duration
• Mute send & receive
• Variable ducking level when muted/gated
• Fade back from mute/gate
• 4 Priority levels
• Bus assignable
• Pluggable screw terminal connections

TELEPHONE (TEL

1

S)

Telephone interface input module

• Loop start or ground start trunk interfacing

(requires external power supply)

• Dry loop interface to paging ports
• Audio-activated paging in dry loop
• Gain/Trim control
• Limiter
• Noise gate w/Threshold & Duration
• Mute send & receive
• 4 Priority levels
• Bus assignable
• Transformer-isolated
• Screw terminal connections

TONE GENERATOR (TNG

1

S)

Multiple tone generator input module

• Select 4 of 8 tones to trigger
• 5

1

2 Hz Burst/steady, slow whoop, siren,

mechanical bell, Klaxon, night ringer, double
chime, & doorbell tones

• Momentary & continuous playback modes
• Screw terminal trigger connections
• Level control
• Microprocessor-controlled operation
• Mute send & receive
• 4 Priority levels

Summary of Contents for BAL2S









Reviews:

No comments

Brands by name

Popular brands

Load more brands