Boehringer Ingelheim FreVAX 101, User Manual

Page: 8 / 23

8
Otherwise, vaccine will be spilled over the device while a bottle is being connected to or disconnected
from the bottle mount.
If using the tubing collar to connect a larger bottle via tubing, prefill the tubing (!) prior to attaching it
to the tubing collar. When the tube starts to fill, kink the tube just before the end to prevent loss of
vaccine. Then quickly connect the tubing to the adapter.
6. Device Start
Once the vaccine bottle is connected, insert the battery and the device will turn on, showing both the
Boehringer Ingelheim and the FreVAX™ logos on the display. Both logos are shown for 1 second.
If the battery is sufficiently charged: The display will switch initially to the User Menu, unless the
device is in a loaded condition (cylinder filled with vaccine / rinsing fluid) – in which case the display
will show “! Loaded Device ! Press any button” and the LED bars turn red.
By pressing one of the display buttons, the device will rinse once, to
unload the device. The liquid will be sprayed out through the injection
head.
Afterwards, the device will switch to the initial display of the User Menu (see chapter 7).
Before pushing the trigger for the first time, make your settings in the User Menu.
If the battery is too low : The display will show “Low Battery Please
Charge”.