BODYMAX CVEB2419, Assembly And Operating Instructions Manual

Page: 12 / 24

CVEB2419 B1 Racer Indoor Cycle
12
3.3 Console display and button functions
Power on If you push the selection button, the console will be switched on. The
parameters of your last training session will be displayed.
Selection button With this button you can switch between all the parameters manually.
SCAN
When the little arrow points to SCAN, the console will switch between
all the parameters and display the respective value one by one every 4
seconds automatically (Time - Speed - Distance - Calories).
TIME
When the little arrow points to TIME, your current training time will be
displayed (unit: min; range: 00:00~99:59).
SPEED
When the little arrow points to SPEED, your current speed will be displayed
(unit: km/h; range: 0.0~99.9km/h).
DISTANCE
When the little arrow points to DIST, your covered distance will be displayed
(unit: km; range: 0.00~99.99 km).
CALORIES
When the little arrow points to CAL, your burnt calories will be displayed
(unit: kcal; range: 0.00~999.9 kcal).
RESET Push the selection button for about 3 seconds and the parameters will be
reset to zero.
Auto off The console will shut down automatically when it does not receive any
signal for 4 minutes.
selection button