BodyGuard
SAFETY SOLUTIONS
-Tag
®
Driver Awareness System
BodyGuard Safety Solutions—A division of Orbit Communications Pty Ltd Install Guide rev r1.11
Page
9
Cab Alert Location
The Cab Alert unit mounts inside the driver cab within view of the driver. The speaker mounts in any
convenient location (keep speaker location at least 300mm away from location of driver’s ear).
All cables exit from the bottom of the enclosure. There is no requirement to leave space around top
or sides of the enclosure. Leave at least 150mm left below the enclosure to enable cables to exit the
enclosure without excessive bending. The supplied pivot mounting bracket enables the cab alert unit
to be mounted in any orientation and then rotated to best viewing angle (for instance, it can be
mounted on the roof of the vehicle). The Pivot mount bolts to the back of the Cab Alert enclosure
using four M5 x 16mm bolts. Be careful to ensure the unit does not interfere with driver movement
or obstruct the view.
Important: Use only M5 x 16mm bolts for pivot mount. Ensure no more than 10mm thread extends
into the Enclosure when bolts fastened. If the pivot is not used then ensure that the thread of bolts
used does not extend more than 10mm into the enclosure.
