Product Assembly
STEP 2: Install Hexagon Sleeve
a.
Insert the correct Hexagon Sleeve into the handlebar tube, aligning the
hole to match the side of the
Cap Screw
during STEP 3a.
●
SPX or SPX-Mag use part
#10a (larger Hexagon Sleeve)
●
SPR or SPT-Mag use part
#10b (smaller Hexagon Sleeve)
2
b.
Then continue by installing the
Main Frame
Assembly (01-ASM)
into the
Hexagon Sleeve
(10a or 10b).
c.
Confirm the
Main Frame Assembly (01-ASM)
inside the tube, is not extended out past the
“Max” line marked on top of frame.
STEP 3: Securing Frame
Secure both the
Hexagon Sleeve (10a or 10b)
and the
Main
Frame Assembly (01-ASM)
to the handlebar tube using the
existing
Cap Screw (M5 x P1.0 x 10mm L ) (A)
from STEP 1.
NOTE:
Double confirm the Cap Screw is tightened down to
withstand vigorous training usage.
STEP 4: Install Connect-22
Secure the
Connect-22
to the
Vesa-100
Bracket (7)
using the hardware, located in a small bag
supplied within the Connect-22 box:
●
4: Philips Head Screws (M4 x 1.0p x 8mm L)
NOTE:
Double confirm the Screws are tightened down to withstand vigorous usage.
01-ASM
Recommended Tool:
PHILLIPS SCREWDRIVER #2
w/ Magnetic TIP
NOTE:
Double confirm the Cap Screw HOLE in the Hexagon Sleeve
lines up with the bottom hole on the handlebar tube.
